Home > Plant & Equipment > Plant Hire >

Two diver HP / LP Peli-panel
Two diver HP / LP Peli-panel


 
Alternative Views:



Availability:: Available
Product Code: DSPH-003
Call us to Hire

Description
 

The SMP 2 Diver HP/LP Panel provides a means of independently supplying breathing air to two divers and continuously monitors the two diver’s depths to a maximum of 50m. The panel has a compact light design built into a robust Copolymer Polypropylene IP67 rated case providing protection from environmental and operational factors. The panel includes 4 HP air inlets and 2 LP air inlets, the former of which are regulated down to provide a secondary means of supplying each diver with air.


Features

Inlet (per diver)

  • 2 x HP Inlet
  • 300 Bar Max Working Pressure
  • 1/4" NPT Female

Operational (per diver)

  • 2 x HP Regulators
  • 400 Bar/PSI HP Gauges
  • 28 Bar/PSI LP Gauges
  • 0 - 70 MSW/FSW Depth Gauges
  • Brass Needle Valves
  • Stainless Steel Ball Valves
  • Brass / Steel Fittings

Outlet (per diver)

  • Diver Air: 3/8" NPT Female
  • Diver Pneumo / Depth: 1/4" NPT Female


Specs:

2 Diver HP/LP Control Panel in a Pelican Case:

The SMP 2 Diver HP/LP Panel provides a means of independently supplying breathing air to two divers and continuously monitors the two diver’s depths to a maximum of 50m. The panel has a compact light design built into a robust Copolymer Polypropylene IP67 rated case providing protection from environmental and operational factors. The panel includes 4 HP air inlets and 2 LP air inlets, the former of which are regulated down to provide a secondary means of supplying each diver with air.


There are 6 air supply inlets, 2 off LP and 4 off HP.
There is also a crossover valve in order to allow air to pass from Diver 1 to Diver 2 if required and vice versa.
The depth gauges are 100 mm dia with a range 0-70 metres (0-230 feet).
The panel pressure gauges are 63 mm dia.
The pressure gauges are dry filled or oxygen clean dependent on the customer requirements.
All the inlets and outlets are 3/8 & 1/4 NPT.
All LP valves are quarter turn ball valves and the HP valves are 1/4 inch needle valves.
The LP air supply has a max inlet working pressure of 21 bar and the HP air supply has a max inlet working pressure of 300 bar.
The basic outside dimensions are 460 mm H x 800 mm W x 290 mm D.

Standard Connections are as follows:

Inlets: HP ¼” NPT Female LP ⅜” NPT Female
Outlets: Divers Supply ⅜” NPT Female Divers Pneumo ¼” NPT Female
Other connections are available but subject to separate quotation.
The panel is supplied fully certified, calibrated and complete with supporting documentation.

Technical Specification Designed and manufactured in accordance to HSE guidelines, BSI quality standards & CE approvals. Testing and certification in accordance with IMCA D018.

Capacity : 2 Divers Diving Gas :
Air Max Depth : 50 metres
Inlet Connections : 4 x HP Air Inlet (1/4” Female NPT) MAWP 300 Bar 2 x LP Air Inlet (3/8” Female NPT) MAWP 21 Bar
Outlet Connections : 2 x LP Diver Air Outlet (3/8” Female NPT) MAWP 21 Bar 2 x Pneumo Air Outlet (1/4” Female NPT)
Pipe Fittings : Combination of brass and steel fittings Weight : Approx 25kg Dimensions : L 527mm x W 800mm x D 292mm

Share your knowledge of this product. Be the first to write a review »